CamPro projectiles have an excellent reputation among shooters from all across Canada. Their bullets have been in production since 1995 and are used by shooters for whom precision matters, including law enforcement and competitive shooters. If you value consistency, reliability and uniformity, then CamPro projectiles are made for you.
At the core of each projectile is 2% antimony and 98% lead. The antimony gives the projectile more ductility and allows the bullet to adjust its form to the gun barrel. Each projectile is swaged, leading to greater weight uniformity from bullet to bullet while slightly increasing the bullet density.
CamPro uses a slightly thicker copper layer to plate their bullets. This ensures that the copper coating will not be perforated or weakened during the crimping process, allowing the bullet to retain its strength and avoid splitting during firing. In addition to all this, the copper plating allows for the safe use of magnum loads and eliminates lead fouling in the bore and lead pollution in the air.
As a last step in the manufacturing process, each bullet is reformed so as to achieve consistency across the board. Many manufacturers size by forcing the bullets into a hole so that they do not exceed the maximum diameter, but CamPro bullets are reformed by pressing so that each projectile is not only acceptable, but reaches its optimal dimensions.
Specifications:
- Caliber: .44
- Weight (grain/gram): 240 / 15.552
- Bullet Style: Full Copper Plated, Round Nose
- Sectional Density: .186
- Cannelure: No
- Diameter (in/mm): .429 / 10.897
- Cupper Thickness (in/µm): .008 / 203
- Quantity: 200
- Part #: CP-44240
*****CAMPRO BULLETS ARE PROJECTILES. THEY ARE NOT LOADED CARTRIDGES. THEY CANNOT BE FIRED OUT OF THE BOX*****
